APCT Increases Technology with Rigid Flex Optical Registration from DIS
April 8, 2021 | APCTEstimated reading time: 1 minute
APCT Inc has added Rigid Flex Optical Registration™ (RFS), developed by DIS Inc of Islandia, N.Y. to enhance their PCB registration capabilities. The RFS machine is built specifically to process difficult flex, rigid and rigid-flex jobs. Using DIS, Inc proprietary Optical Registration™ technology in conjunction with SmartWeld, the RFS has the ability to align inner-layers and pre-preg without the use of expensive pin-tooling.
Optical Registration™ allows for optical alignment of inner layers during the lay-up process of multi-layers and sequential build-up technology, eliminating the need to manually punch and pin individual layers prior to lamination. The tolerance build-up and variability associated with traditional pin lamination systems is eliminated.
A vision and positioning system sequentially align and clamp layers together utilizing a full platen, assuring coplanarity and accuracy. The aligned multi-layers are welded together with SmartWeld™, the patented coupled induction welding system developed by DIS Inc.
In addition, Optical Registration™ provides an opportunity to utilize X-ray inspection to quantify registration of welded multi-layers prior to lamination. The panel can then be measured after lamination, providing the data to analyze the lamination process and take corrective actions if necessary.
The process has been in use worldwide at both high tech and high-volume shops over the past several years. Some of the leading-edge requirements placed on PCB shops utilizing pin technologies are not able to be met unless they introduce Optical Registration.
About APCT Inc.
APCT is a leading manufacturer of high reliability rigid printed circuit boards. Located in Anaheim California, the plant is designed to facilitate world class cycle times and support a broad range of technologies. Their corporate culture focuses on continuous improvement and strives for “best in class” in service and support. APCT is ISO9001:2008, IPC 6012 Class III certified and ITAR registered.
About DIS Inc.
DIS Inc. is a worldwide leader in optical registration systems for the printed circuit board industry and an innovative producer of inner-layer/sub-lam registration and welding equipment. DIS has developed Direct Optical Registration™, a new method of optically registering and welding inner-layers/sub-lam such that registration is improved by eliminating mechanical tooling, operational cycle times are reduced and process flexibility is increased all while significantly reducing operating costs.
Suggested Items
PCBflow Helps Designers Choose Best Manufacturer for the Job
03/28/2024 | Andy Shaughnessy, Design007 MagazineI recently spoke with a few technologists who have first-hand experience with PCBflow: Susan Kayesar, technical product manager with Siemens; Evgeny Makhline, CTO of Nistec, a CEM based in Israel; and Peter Tranitz, senior director of technology solutions and leader of the IPC Design Initiative. They explain how PCBflow functions, from the designer’s and manufacturer’s viewpoint, and how this database helps break down the wall between these stakeholders.
ASMPT to Exhibit Smart Manufacturing at IPC APEX EXPO 2024
03/27/2024 | ASMPTWith its innovative, data-driven Intelligent Factory concept and a comprehensive hardware and software portfolio around SMT production, market and innovation leader ASMPT will be a major presence at the IPC APEX EXPO 2024, the industry’s main event in California.
Mycronic to Showcase More Versatile, High-productivity Assembly Solutions at IPC APEX EXPO 2024
03/27/2024 | MycronicMycronic, the leading Sweden-based electronics assembly solutions provider, will continue to respond to growing customer demand for high-flexibility, high-productivity solutions for zero-defect PCB assembly at IPC APEX EXPO 2024 in Anaheim, CA on April 9 - 11.
TRI Launches New Advanced Packaging 3D CT AXI Solution
03/26/2024 | TRITest Research, Inc. (TRI) proudly announces the launch of the SEMI 3D CT AXI solution, TR7600F3D SII Plus, marking a paradigm shift in precision and reliability for high-reliability electronics manufacturing, such as the Advanced Packaging Industry.
Blackfox Ready for IPC APEX EXPO 2024
03/26/2024 | Andy Shaughnessy, I-Connect007Blackfox Training Institute offers IPC-certified training for a myriad of PCB assembly techniques and standard certifications. With many technologists beginning to eye retirement, this training is at a premium. I recently spoke with Jamie Noland, director of training and education for Blackfox, about the company’s latest educational efforts, and his plans for the upcoming IPC APEX EXPO, where Blackfox will be exhibiting.