Just Ask Tara Dunn: DFM for Flex and Rigid-Flex
November 6, 2020 | I-Connect007 Editorial TeamEstimated reading time: 1 minute
First, we asked you to send in your questions for Happy Holden, Joe Fjelstad, John Mitchell, and others in our “Just Ask” series. Now, it’s Omni PCB President Tara Dunn’s turn! A regular Flex007 columnist, Tara discusses flexible circuits, rigid-flex, and rigid PCBs, as well as RF/microwave technology, microelectronics, and additive processes. Tara is the co-founder of Geek-a-Palooza and a show manager for the SMTA Additive Electronics TechXchange event. She has over 20 years of experience in the PCB industry. We hope you enjoy “Just Ask Tara.”
Q: Flex designers don’t seem to pay much attention to a fabricator’s limitations. What would you advise new flex designers as far as DFM?
A: Knowing your fabricator’s limitations is important, whether that be for rigid PCBs or flexible circuits. And this is especially important with flexible circuit designs. There is a wide range of capabilities across the supply base. Some focus on simple flex, single-sided, double-sided, or low layer counts. Others focus on high-complexity technology, including complex rigid-flex and bookbinder technology. It is critical to really understand your fabricator’s capabilities and design to those capabilities.
As important, in a general sense, is to understand that flexible circuit fabrication, while similar to rigid PCB fabrication, has subtle differences that impact things, such as minimum line width and space and hole size. Not only are the layers thinner, with considerations needed for handling and processing, but the materials themselves are less stable than traditional rigid materials, with subtle shifts in material size through processing and changing environmental conditions. These things impact registration during fabrication, and feature sizes that may be common in rigid PCB fabrication may not be the “standard” for flexible circuit designs. Communication is king.
To submit your questions for Tara, click here.
Suggested Items
Orbex Secures £16.7m Investment for Rocket ‘Ramp Up’ Period
04/24/2024 | OrbexThe UK spaceflight company Orbex has received £16.7m from six backers in an update to its Series C funding round.
Real Time with... IPC APEX EXPO 2024: Going Vertical: Schmid's Advanced Solutions for Printed Circuit Boards
04/24/2024 | Real Time with...IPC APEX EXPOEditor Marcy LaRont chats with Bob Ferguson, the president of SCHMID, about advanced solutions for PCBs and the equipment they are highlighting at this year's show, delving into vertical no-touch handling systems and the prospect of achieving sub 10-micron lines. Inspired by SCHMID's technology, Ferguson expresses excitement about where the industry is today.
Real Time with... IPC APEX EXPO 2024: Advancements in Laser Depaneling with LPKF
04/24/2024 | Real Time with...IPC APEX EXPOJake Benz, LPKF sales manager for North America, discusses the company's advancements in laser depaneling. LPKF has introduced a green wavelength laser for processing rigid FR-4 circuit boards, bringing significant gains in processing speeds to market. The company transitioned from IR CO2 to UV wavelength due to heat and burning issues.
Adura Solutions Exhibits at Del Mar 2024
04/24/2024 | Adura SolutionsSumit Tomar, CEO of Adura Solutions, has announced that his company will be exhibiting at this year’s Del Mar Electronics and Manufacturing Show to be held at the Del Mar Fairgrounds, San Diego, California from April 24th through the 25th.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.